APPLICATIONS & DESIGN.

MonkeeTree can be installed inside or outside, to a recommended height of up to 16ft (5m) and is designed for fully mobile adult cats weighing up to 22Ibs (10kg).

The components forming the ladder are supported by a central Pillar Pipe purchased separately. A suitable pipe can be supplied by an installer or purchased from a local hardware store or plumbing supplies merchant. 

Refer to the Planning Guide for Compatible Pillar Pipes to suit your Installation.

inside or outside cat climbing ladder

MonkeeTree - The Scalable Cat LadderMONKEETREE LAYOUTS:

Care needs to be taken when selecting a suitable location for your Monkee Tree. A safe landing area free of obstacles around your Monkee Tree is required. Any outside access way leading to your Monkee Tree needs to comply with your local building regulations (to ensure adequate barriers are in place).


STAR LAYOUT:

Star or spiral shape where steps can be arranged randomly, in a spiral or zig zag formation.


SEMI CIRCLE LAYOUT:

Installed flat against a where steps elevate in a zig zag configuration within a semicircle area.


CORNER LAYOUT:

Installed within the corner of a building where steps elevate in a zig zag configuration within a quarter circle area.


monkeetree star layout scalable cat ladder

semi circle scalable cat ladder

quarter scalable cat ladder



MonkeeTree - The Scalable Cat LadderCONSTRUCTION & COMPONENTS

Constructed from durable and fully recyclable polypropylene.  Anyone with basic DIY skills can assemble a Monkee Tree.

The Trunks are assembled on a central Pillar Pipe (not supplied) to suit your specific requirements. Branches can be positioned in 12 different locations around the Trunk (similar to a clock). Trunk wedges secure the assembly to the Pillar Pipe. Screws secure the Trunks and Branches to the Pillar Pipe. The Stump secures the assembly to the floor and can be adjusted to account for sloping surfaces.

monkee tree scalable cat ladder
adjustable scalable cat ladder

MonkeeTree - The Scalable Cat LadderMONKEETREE LAYOUTS:

scalable cat climbing tree

TRUNK

Truck 4B – 4 inch high section with branch attachment
(MKT-TRK-4B.1)
Dia – 4in (100mm), Height 4in (100mm)

scalable cat ladder accessory

BRANCH

Branch 8 – Medium step 8 inches wide designed to prevent
water collecting for indoor or outdoor use (MKT-STP-8.1)
Width – 8in (200mm), Length 11in (280mm)

modular cat climbing tree

STUMP

Stump 8 – 8 Inch Diameter with tilt adjustment
(MKT-STM-8T.1)
Dia – 8in (200mm)

modular scalable cat ladder

TREETOP

Tree Top - Top cap
(MKT-TTP-4.1)
Dia – 8in (200mm)

monkee tree scalable cat ladder

PILLAR PIPE

Internal Pipe (Available at any hardware store)
Outside Diameters between 1.59” – 1.69” (40.5mm – 43.0mm)
Minimum Inside Diameter 1.4” (36mm)

* Dimensions shown are Indicative. Refer to the MonkeeTree Installation Instructions for further details.